The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 
Forgot password

magneto bolt

  • 23 May 2019 1:32 AM
    Quote
    Message # 7360524
    Anonymous

    while we are on bolts can someone tell me the correct sized bolt that goes into the magneto timing gear and holds that gear onto the magneto tapered shaft please?
  • 26 May 2019 10:19 AM
    Quote
    Reply # 7431966 on 7360524
    Deleted user

    Sorry, but I don't know. Is it Bosch or Splitdorf?
  • 28 May 2019 12:33 AM
    Quote
    Reply # 7465759 on 7360524
    Anonymous

    it is a Splitdorf NS - I actually can't find a brand but the tech tips have the NS which is the same as mine.
  • 29 May 2019 3:07 AM
    Quote
    Reply # 7487944 on 7360524
    Tim Raindle (Administrator)

    Hi Michael, Its a nut on a splitdorf. The thread is easily damaged. If you have a bolt  then someone has damaged or broken off  the thread and replaced it with a bolt, ( Not unusual) so it could be any size. 

    Investigate carefully. 

    It does not need to be very tight, just enough to flatten a lock washer, as it should be held in place by locking on the taper. 
  • 30 May 2019 12:38 AM
    Quote
    Reply # 7496155 on 7360524
    Anonymous

    great Tim thanks for that. It makes more sense if it was a thread - so I guess it was broken off - drilled out and threaded so now I need a bolt. I will have to work out the thread and get a bolt accordingly.
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring
Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software