The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 
Forgot password

Clutch Removal

  • 31 May 2018 8:47 AM
    Quote
    Message # 6275151
    Mick Lucioni

    Hi,

    Just ordered the R&O manual … but

    Could someone advise on removal of the clutch basket please.

    I have managed to get the clutch centre off with a puller.

    Now I need to get the main basket free.

    Any advice welcome so I can split the engine and transmission.

    Thanks Mick
  • 01 Jun 2018 12:41 AM
    Quote
    Reply # 6278966 on 6275151
    Philip Jenner
    Mick Lucioni wrote:

    Hi,

    Just ordered the R&O manual … but

    Could someone advise on removal of the clutch basket please.

    I have managed to get the clutch centre off with a puller.

    Now I need to get the main basket free.

    Any advice welcome so I can split the engine and transmission.

    Thanks Mick

    1,.remove transmission  top  

    2  There is a large not  on back of clutch hub   with  a Locking tab washer , 

    undo this nut  and clutch hub will slide out .
  • 01 Jun 2018 3:44 AM
    Quote
    Reply # 6279162 on 6275151
    Tim Raindle (Administrator)

    Hey Mick, back in UK for a bit this weekend on, might make Sittingbourne run. Give me a call if you need advice/hand, 01483 202547, if not should be down to see Frank Mitchell soonish, so in your area. Would be good to see Tonys 101 back on the road.

    Tim R
  • 01 Jun 2018 5:04 PM
    Quote
    Reply # 6280856 on 6275151
    Harry Roberts
    Mick Lucioni wrote:

    Now I need to get the main basket free.

    Any advice welcome so I can split the engine and transmission.

    Hi Mick, did you remove the nut on the inside of the gearbox?  Sorry if you're way beyond that point and you have the nut off, but the basket should come right off!  (requires a special wrench to reach that nut, Greer's has them or you can make one if you're handy!)
  • 02 Jun 2018 5:09 AM
    Quote
    Reply # 6281680 on 6275151
    Mick Lucioni

    Hi. Yes thanks for the info. I wondered if that nut was holding the clutch.

    The old one looks like someone has tightened it with a chisel … I guess they didn't have any tools to hand!

    So clutch now off! and gearbox off the engine.

    I'll have to look at buying/making a tool for reassembly …

    Thanks for the help. Mick
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring
Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software