The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 
Forgot password

Front hub axle shaft length. Hooter originality.

  • 11 Jan 2015 4:18 AM
    Quote
    Message # 3188032
    Mike Byrne

    Hi. Can anyone give me the length of the solid axle shaft for the front hub. Was there a difference between 1928 hub shafts and 1929 ?

    Why I am asking is that the shaft threads protude around 3/4" past the nuts.

    One other question. I got with the bike an Ames horn which resembles the large horns that are fitted to the down tube, but it is shorter. Could this be original ?
  • 12 Jan 2015 4:50 AM
    Quote
    Reply # 3189561 on 3188032
    Carl-Erik Renquist

    I got two lengths of front axles here on my table, same diam (7/16) and length of thread (~7/8) and drilled holes for cotter pins (2,8mm). but one is 175mm and the other is 189mm. The longer is for a 101 but the shorter that I don't know what model it is from. The front axle for the ball bearing hub and the later roller bearing hub carries the same part no. 26 B 238

    Last modified: 12 Jan 2015 5:01 AM | Carl-Erik Renquist
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring
Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software