The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"


  • 06 Jan 2020 1:13 PM
    Message # 8494615

    Hello Everyone, reading the 101 shop manual & forum and have question on ring gaps. Currently is .015-.018 still the standard for 45" cylinders & does this include oil ring? I have stock bore cylinders from Hutchinson with 3 ring + oil ring pistons. I appreciate your time, as always.

  • 07 Jan 2020 8:18 AM
    Reply # 8504197 on 8494615
    Tim Raindle (Administrator)

    Set a pair up just yesterday at 17 thou ring gap, which was pretty much what they came out of the box as with cylinder honed to 2.8765"

    Did you get manifold nuts from Hutchy ? got a couple of pair here that we didn't and the threads are a little undersized, so stock manifold nuts don't fit . 


  • 07 Jan 2020 3:30 PM
    Reply # 8509756 on 8494615

    Yes Tim, I bought manifold nuts from him with cylinders & they fit good. The valves I got won't work though,I purchase others. My Hastings rings were .012 out of box . Whats your opinion on .015 be good or go to .018-.020 for safe running on new cylinders with .0035 hone for standard piston fit? 


 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software