The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
 

Gearbox ...chain guard stud

  • 30 Aug 2019 6:06 AM
    Message # 7856451

    If the chain guard stud has punched through the gear case, how much distance would the stud tip have, before it comes into contact with internal components?  I have found a 1/4 “ 24 tpi stud, 1 1/2  inch in length, which suits the case thread.  

    When screwed in, it bottoms out, where a 1/2 inch length, of the stud, remains exposed and visible, when viewed from the outside of the case.  I now need to know, if that point where it bottoms out, is the gear casing, or an internal gearbox component.  A rotating gear perhaps ?

    Last modified: 30 Aug 2019 7:17 PM | Danny Marks
 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
 
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
 
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software