The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"

101 Frame angle

  • 12 Dec 2017 4:13 PM
    Message # 5625809

    I need to know the exact angles for the down tubes, where they splay out near the bottom of the frame, looking from the front.

    I need this as I am making the front sidecar bracket to fit both tubes.

    I am making a wooden pattern first and will then get it machined

    out of a nice thick piece of steel.

  • 15 Dec 2017 6:36 AM
    Reply # 5629473 on 5625809

    No need for the angle now, as I have worked it out.

    It is approx. 20.5 degrees on my frame from the vertical on each down tube, but that could vary on other frames.


  • 16 Dec 2017 1:38 AM
    Reply # 5630533 on 5625809
    Tim Raindle (Administrator)

    will check tomorrow Mike .

 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software