The 101 Association, Inc.
For the preservation and enjoyment of 1928 to 1931 Indian Scout Motocycles
"You can't wear out an Indian Scout"
  • 12 Jan 2018 6:42 PM | Bill Erickson

    Ready to start a loving relationship with a 101 Scout - any year is fine. Would like fairly complete original or nice restoration but any condition will be considered.  



  • 08 Jan 2018 10:01 AM | Vahan Dinihanian

    Wanted:  Powerplus big valve or early chief engine.  Any condition or parts  503 849 4091 cell. 

    Vahan Dinihanian 

  • 08 Jan 2018 9:57 AM | Vahan Dinihanian

    Wanted:   42 Degree magneto carcasses, any condition. Magneto's restored in trade for your leads or your carcasses.  Any model of  Dixie, Splitdorf, Bosch.  503 849 4091 cell 

    Vahan Dinihanian   Dinihanian Mfg. 

  • 24 Dec 2017 10:56 PM | Vahan Dinihanian

    Eagle Magneto service:  Portland Oregon.  Indian Magneto's for sale and exchange for your old rebuildable mags.  Every part inspected and renewed to better than new. hot rod rewound coils with larger secondary. Upgraded capacitors.  Very carefully and meticulously rebuilt without bead blasting. New bearings greased, end play checked, magnet re charged. New Caps, Rotors and pure tungsten points. 

    Tested with our Allentronic spark gap under compression pressure, Eisemann Heitz coil tester, Capacitor tested on the Bendix and EXE. 

  • 31 Oct 2017 9:54 AM | Anonymous

    I am in need of an intake manifold for a 1928 101 Scout.  According to several contacts, there are no repops for this. 

    Any help in locating this would be appreciated.

    We are looking into machining a 741 manifold for this purpose, but I'd prefer a 101.

    Thanks for any assistance.

  • 01 Oct 2017 4:14 AM | Danny Marks

    Calling out LOUDLY to the 101 fraternity (brotherhood) for a DLX64 Carb and SIDESTAND !!  If anyone can help please, that would be great.  I have a bad back, and can't put these bikes on their rear stand.  Any assistance would be greatly appreciated.

    Kinda Regards

    Danny Marks

  • 07 Sep 2017 7:37 PM | Heath Mckenzie

    I'm looking for a scout 101 for a project any condition.

  • 19 Jun 2017 2:29 PM | Anonymous

    1928 Through tank compression release rod assembly.  

    Any recommendations on any or all of the parts to this assembly would be appreciated.  The most important part is the one sided rod end clevis that attaches to the lever on the case, but i'll take the whole thing if someone has one to spare.


    Bart Mc

  • 13 Jun 2017 7:25 AM | Tim Raindle (Administrator)
    Am looking for a 101 headstock casting for a customers original frame, the headstock has been heavily welded and shattered thru the bearing housing. Desperately need a good useable casting to get him back on the road. 

    Also looking for a sport scout/741 front end for another project, absolutely anything considered, rusted/bent /broken, I can fix it. 

    Email or call shop 860-482-9215

  • 28 May 2017 5:58 PM | Danny Marks

    After a DLX 64 Carburettor and Side Stand for my '31 Scout. Contact Danny  

 AMCA Chapter WebRing AMCA National 
Next >>       Random       Hub       << Prev
Classic Motorcycle Webring

Classic Motorcycle Webring

Join Now | Ring Hub | Random | << Prev | Next >>

Indian Motorcycles Webring
<< Prev | Hub | Rate | Next >>

Copyright © 2009 The 101 Association, Inc. All rights reserved. 

Powered by Wild Apricot Membership Software